Annual Report of the National Advisory Committee for Aeronautics, Volume 20; Volumes 475-507

Front Cover
Includes the Committee's Technical reports no. 1-1058, reprinted in v. 1-37.
 

Other editions - View all

Common terms and phrases

Popular passages

Page 2 - Aeronautics to supervise and direct the scientific study of the problems of flight, with a view to their practical solution, and to determine the problems which should be experimentally attacked, and to discuss l heir solution and their application to practical questions.
Page 249 - The investigation was conducted by the National Advisory Committee for Aeronautics at Langley Field, Va.
Page 437 - Wind-Tunnel Research Comparing Lateral Control Devices, Particularly at High Angles of Attack.
Page 35 - Standards; together with not more than five additional persons who shall be acquainted with the needs of aeronautical science, either civil or military, or skilled in aeronautical engineering or its allied sciences...
Page 105 - Fred E.: Working Charts for the Selection of Aluminum Alloy Propellers of a Standard Form to Operate with Various Aircraft Engines and Bodies.
Page 39 - A Flight Investigation of the Lateral Control Characteristics of Short Wide Ailerons and Various Spoilers with Different Amounts of Wing Dihedral.
Page 343 - The radio frequency and intermediate frequency parts of a radio receiver that produce a low level output signal. tuning The process of adjusting a given frequency; in particular, to adjust for resonance or for maximum response to a particular incoming signal. turns ratio In a transformer, the ratio of the number of turns on the secondary to the number of turns on the primary. tweaking The process of adjusting an electronic circuit to optimize its performance.
Page 579 - Weick, Fred E., and Wood, Donald H.: The Twenty-Foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics.
Page 316 - ... first digit indicates the mean camber in percent of the chord; the second, the position of the camber in tenths of the chord aft of the leading edge ; and the last two give the maximum thickness in percent of the chord. The group of digits following the dash designate the thickness distribution. The first digit designates the leading-edge radius and the second digit gives the position...

Bibliographic information