Proceedings of the Annual Convention of the American Railway Engineering and Maintenance-of-Way Association, Volume 25The Association, 1924 - Railroads List of members in v. 1- |
Contents
25 | |
28 | |
38 | |
52 | |
54 | |
55 | |
65 | |
97 | |
104 | |
113 | |
153 | |
159 | |
189 | |
211 | |
217 | |
252 | |
285 | |
300 | |
314 | |
335 | |
344 | |
358 | |
371 | |
381 | |
385 | |
409 | |
439 | |
479 | |
549 | |
1072 | |
1219 | |
1227 | |
1233 | |
1241 | |
1250 | |
1256 | |
1262 | |
1268 | |
1276 | |
1282 | |
1299 | |
1309 | |
1315 | |
1331 | |
1337 | |
1356 | |
1366 | |
1373 | |
1375 | |
1378 | |
Other editions - View all
Common terms and phrases
Albert Reichmann American Railway Association American Railway Engineering Appendix AREA Asphalt ballast Base boiler BOLT HOLES bridges calcium carbonate capacity carbonate cars cent Chairman Chicago Union Station clearance Committee compression members connection construction cost creosoted delivery tank diameter Electric flanges floor Form of Agreement Freight Fuel Oil girders grade Grantor gravity H. H. Richardson handling heat Height inch Insulators joint section length less live steam load located locomotive main track maintenance material maximum method Mileage motor NEUTRAL AXIS operation paint parties hereto passengers PENNSYLVANIA RAILROAD plates practice pump rail Railroad Railway Company Railway Engineering Association ramps recommended rivets roads roof Specifications Standard station Steam coils steam line steel tanks storage tanks structures Sub-Committee submitted sump surface switch tank cars terminals thickness timber tion traffic trains trough trucking trusses unloading welding width wire Wood Block Yards
Popular passages
Page 413 - The inspector representing the purchaser shall have free entry, at all times while work on the contract of the purchaser is being performed, to all parts of the manufacturer's works which concern the manufacture of the bars ordered.
Page 18 - A vacancy in the office of President shall be filled by the VicePrésident, who is senior by age.
Page 277 - ... lattice bars and other small sections shall, when loaded for shipment, be properly separated and marked for identification. The identification marks shall be legibly stamped on the end of each pin and roller. The melt number shall be legibly marked, by stamping if practicable, on each test specimen.
Page 413 - Section 5 and any part of the fracture is more than y± inch from the center of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. 10. If the results of the physical tests of any test lot do not conform to the requirements specified...
Page 637 - An Act to provide that the United States shall aid the States in the construction of rural post roads, and for other purposes...
Page 414 - ... works which concern the manufacture of the splice bars ordered. The manufacturer shall afford the inspector, free of cost, all reasonable facilities to satisfy him that the splice bars are being furnished in accordance with these specifications. All tests (except check analyses) and inspection shall be made at the place of manufacture prior to shipment, unless otherwise specified, and shall be so conducted as not to interfere unnecessarily with the operation of the works.
Page 413 - ... (b) If any test specimen shows defective machining or develops flaws, it may be discarded and another specimen substituted. (c) If the percentage of elongation of any tension test specimen is less than that specified in Section 6 (a) and any part of the fracture is more than } in.
Page 567 - When a train stops or is delayed, under circumstances in which it may be overtaken by another train, the flagman must go back immediately with stop signals a sufficient distance to insure full protection.
Page 1115 - Expenses in connection with additions and betterments. The cost of removing old material from equipment and from buildings, bridges, wharves, tracks, and other fixed improvements, shall be charged to the appropriate operating expense accounts. Such charges shall include the cost of removing old foundations and filling old excavations, and restoring condition of grounds after addition and betterment work...
Page 275 - In this case, the ends shall be of a form to fit the holders of the testing machine in such a way that the load will be axial. Bend test specimens may be 1 by yí in. in section. The axis of the specimen...