« PreviousContinue »
(1) REVISION OF MANUAL Definitions. Account. (Present text)
A Statement required to enable payment to be made for labor performed and material furnished or to establish the detail, total
and comparative cost of work and various classes of expenses. ACCOUNT. (Revision)
A Statement required to enable payment to be made for labor performed, material furnished or to establish the detail, and total
cost of work or class of expense. LEDGER ACCOUNTS. (Present text)
Statements kept in ledger form in order to establish the detail, total and comparative cost of individual pieces of work or classes
of expenses. LEDGER ACCOUNT. (Revision)
An account of an individual piece of work or class of expense kept in ledger form.
Appendix B (2) COST-KEEPING METHODS AND STATISTICAL RECORDS
AND EMBRACING THE SUBJECT OF FORMS FOR
IN CONTROLLING EXPENDITURES
H. BORTIN, Chairman; E. B. FITHIAN, W. F. OGLE, H. J. SARGENT, W. A. VANHOOK, Sub-Committee.
When your sub-committee reported progress last year it had hoped that the railroad conditions which have a bearing on our subjects would so improve as to make a final report this year desirable and practicable.
Shortly after the March, 1921, convention a start was made by the Chairman and one of the near-by members of the Committee toward outlining a program for the preparation of a final report, but it soon became apparent that under the existing railroad situation your sub-committee could not do justice to its subject if it prepared and submitted a final report this year.
At a meeting of the sub-committee on July 11, 1921, which was attended by the full membership of the sub-committee (except one), as well as by the Chairman of the main Committee, and also at a subsequent meeting on September 7, 1921, it was the unanimous opinion that a final report, such as was planned in the 1919 Report of Fundamental Principles, could best be prepared after the existing railroad situation became more stabilized.
The changing conditions and requirements in cost-keeping methods and statistical records and in forms for controlling expenditures which were brought about, first, by Government control and operation of the railroads, then, by the return to private operation, and later, by the provisions of the Transportation Act with the various accounting problems which each of these developments introduced, together with the fact that various official committees of the railroads, the Interstate Commerce Commission, etc., are now developing much data that would be helpful and necessary to embody in the final report of this sub-committee, all these and other practical conditions dictated to the sub-committee the necessity of postponing a final report.
It is the agreed plan of this sub-committee to keep in touch with the data and progress made by the various official committees of the railroads and the I.C.C., who have charge of the collection and compilation of data pertaining to operating expense standards and to other features which bear on our subjects.
With this data soon available, together with data and forms representing the current practice and experience of representative individual railroads, this sub-committee expects to have sufficient information to illustrate and apply concretely the following principles of its preliminary report of 1919 by which the value of all forms, cost-keeping methods and statistical records may be tested: 1. Should be for a purpose 6. Should be accurately compiled 2. a record of facts 7.
economically as3. immediately avail
“ periodic 4. easily understood 9.
comparable 5. uniformly based
(3) FORMS FOR RECORDING DATA FOR KEEPING UP TO DATE PROPERTY CHANGES AND VALUATION OF
PROPERTY OF RAILROADS
HENRY LEHN, Chairman; E. B. CRANE, H. F. SHARPLEY, Chas. SilliMAN, T. H. STRATE, Sub-Committee.
The following three forms were submitted to the Association last year as information: (a) Detailed Estimate Sheet to accompany and supplement the Authority for Expenditures, (b) Register of Authorities for Expenditures, and (c) Equipment Completion Report.
These forms have been given further study this year, resulting in some changes to the first two. The forms as now presented are here shown as Exhibits A, B, and C. They are recommended for adoption.
• mill in Inuividuals A companios, Profit ana Loss, X180. Physical Property
or other account titles as circumstances require. EXHIBIT A-DETAILED ESTIMATE SHEET
Specifications-Form as shown. Size 8/2x11 inches. Printed on white light bond paper; all lines and printing black.
Instructions for use-Each Request for Authority for Expenditure should be accompanied by a detailed estimate of the project on this form, unless the proposed change in the property is so small and so simple that it is deemed unnecessary to show the details of the estimate. It should be signed by the maker and approved by various officers in accordance with the prevailing organization. One copy to be attached to each copy of the A. F. E.
A complete estimate on this form should show:
4. Credits, if any, for material to be recovered, etc., such as salvage from false-work, temporary tracks, and in case of a renewal on account of fire the amount of insurance recovered, and anything else that is a proper credit to the project.
5. Distribution of estimated cost as between Additions, Betterments, Renewals, Replacements, Retirements and between Other Companies and Individuals.
6. Ledger value, Estimated if not known, of property which is to
EXHIBIT B-REGISTER OF AUTHORITY FOR EXPENDITURE
Specifications Form as here shown. Size 14x17 inches. Printed on white medium ledger paper; all lines and printing black. Horizontal lines five to the inch.
Instructions for use-As each project is authorized, the number, date, location, description and estimated cost should be entered on this form in order of the numbers assigned. As the completion reports are submitted the remaining information called for on the form should be entered at once.
This form is designed to be kept in a loose-leaf binder. One book should be kept for each owning company. EXHIBIT C-EQUIPMENT COMPLETION REPORT
Specifications Forms as here shown. Size 11x17 inches. All lines and printing black.
Instructions for use-A report must be prepared on this form for each equipment project by the designated officer, as soon after completion as possible, listing and describing the units of equipment affected and giving careful description of the changes made and listing the units involved, both added and retired, with the costs of each. If a project involves changes in a number of units completed in more than one six months' period a progress report should be made covering the changes completed in each six months' period. When the whole project is finished a_final report shall be prepared covering all the changes made under the A. F. E., which will be a summary of all the semi-annual progress reports.