GS-11; no degree; three months as Maritime Safety Officer,. with OSHA; one year experience as Assistant Superintendent of American Marine Corporation; four years experience as Maritime Safety Officer, U.S. Department of Labor; five months experience as Safety Director and Repair Coordinator of American Marine Corporation; three years experience as Asst. Superintendent for Arnot Marine Corporation; twenty-two years experience Chief Warrant Officer, U.S. Coast Guard (Ship repair, maintenance, inspection); graduate of training program for Compliance Officer; assigned in the New Orleans Area Office. GS-12; has completed extension courses with U.S. Army; seven years experience as Safety Officer, Bureau of Indian Affairs; one year experience as Engineering Technician Safety Inspector; employed with OSHA, U.S. Department of Labor since June 1971 (one year); graduate of training program for Compliance Officers; assigned in the New Orleans Area Office. TULSA AREA OFFICE GS-12, B.S. degree in Ceramic Engineering and registered professional engineer in State of Texas; Seven years experience as District Engineer (consulting safety engineers) at Texas Employers Insurance Association, Dallas, Texas; Three years experience as Safety Engineer with AFLC in San Antonio, Texas, and at A.M.A. director of Maint. Ind. Eng. Br., Kelly AFB, Texas; Three years experience as Safety Engineer with Texas Employers Ins. Association, Dallas, Texas. Graduate of training program for Compliance Officers and is assigned in the Tulsa Area Office of Occupational Safety and Health Administration. GS-5, has an A.A. and a B.B.A. degree; approximately two years experience as Compliance Officer with ESA-WHPC in Jackson, Mississippi; Two years experience as Quality Control Inspector for Firestone Coated Fabrics in Magnolia, Arkansas. Graduate of training program for Compliance Officers and is assigned in the Tulsa Area Office of Occupational Safety and Health Administration and is receiving extensive on-the-job training. GS-12, B.S. degree in Chemical Engineering, is a certified Industrial Hygiene cert. #479, certified Safety profressional cert. No. 359, has been with OSHA approximately one year as CSHO and Industrial Hygienist; three years experience as Safety Engineer with Department of Army Hq.-Rocky Mountain Arsenal, Denver, Colorado; one year experience as Safety Engineer with USAF Air Weather Service Hq., Scott AFB, Illinois; one year experience as Safety Engineer, SAC Base USAF, Ramsey AFB, Pureto Rico; one year experience as Industrial Hygienist with USNAD (Naval Ordinance Systems Command Environmental Health Center) Crane, Indiana; one year experience as Safety Engineer Specialist with Douglas Air Craft Company, Missile & Space Systems Division, Rancho Cardova, California; one year experience as Senior Engineer, Industrial Hygiene, Systems and Programs Safety for Thiokal Chemical Corp. in Brigham City, Utah; eight years experience as Industrial Hygiene Engineer for State of California, Division of Industrial Safety, San Francisco, California; one year experience as Safety Engineer with State of California, Division of Industrial Safety, San Francisco, Calif.; six years experience as Assistant Industrial Hygienist Engineer for State of California, Department of Health, Bureau, Occupational Health, Berkeley, California, Graduate of training program for CSHO and Industrial Hygienist and is assigned in the Tulsa Area Office. GS-9, no degree, has been with OSHA six months as Safety Officer; nine years experience with Naval Ammunition Depot as Safety Inspector; thirteen years experience as Engineman with Naval Ammunition Depot. Mr. Johnson is a member of the American Society Safety Engineers and a member of Navy Field Safety Association. Graduate of training program for Compliance Officers and is assigned to the Tulsa Area Office. GS-14, B.S. degree; seven years experience with LSB/OSHA as Safety Engineer/Area Director; approximately six months as Casulty Underwriter for Industrial Indemnity Company; four years experience as District Safety Engineer with Industrial Indemnity Company; three years experience as Field Safety Engineer with Texas Employers. Graduate of training program for Compliance Officers and is assigned in the Tulsa Area Office of Occupational Safety & Health Administration. GS-12, no degree; has been with OSHA one year as Compliance Officer; one year experience as Safety Officer for Defense Contract Administration Service Region (DCASR-SF), Burlingame, California; one year experience as Safety Officer, Glasgow AFB, Montana; one year experience as Safety Officer, Burlington Army Ammunition Plant, Burlington, New Jersey; six years experience as Commander, Munitions Maint. Squadron, Barksdale AFB, Louisiana; four years experience as Assistant Chief, Special Weapons, USAF HDQ, Wiesbaden, Germany; nine years experience in USAF; three years experience as Chief of Plant II Aviation Department, USAF, Rapid City, South Dakota, Rushmore AFB; six year experience as Flight Commander in Combat Pilot Training course, Williams AFB, Arizonia; graduate of training program for Compliance Officers; working in Little Rock Field office, assigned to the Tulsa Area Office. GS-11, B.B.A. degree, newly employed with OSHA as Compilance Officer; nine years experience as Safety Consultant, Employers Insurance of Wausau; three years experience as Safety Engineer, Rand Corp.; scheduled to attend training program for Compliance Officer. Mr. McKenzie is assigned to the Tulsa Area office and is now undergoing extensive formal and on-the-job training. He entered on duty with OSHA as of 6/25/72. GS-11, no degree; one year experience with OSHA; one year experience as Safety Officer, Bureau of Indian Affairs; six years experience as Safety Inspector, Davis Field, Muskogee, Oklahoma; eleven years experience as Fire Chief, Davis Field, Muskogee, Oklahoma; graduate of training program for Compliance Officers ;assigned to the Tulsa Area Office. GS-9, B.S. degree & M.S. degree; Compliance Officer; seven years experience as Sr. Aerodynamics Engineer, General Dynamics; four years experience as Aerospace Engineer, N.A.S.A. (safety in design responsibility); graduate of training program for Compliance Officers; assigned in the Tulsa Area Office. REGION VII.-OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, Degree: Pennsylvania State Nautical Schoolship, Annapolis-Marine Science Certified Safety Professional. Safety experience: April 1971 to present-Regional Administrator, OSHA: November 1970 to 1971-Regional Director, Bureau of Labor Standards; 1966 to 1970-Safety Engineer, Walsh-Healey; 1959 to 1966-Maritime Safety Consultant; and 1954 to 1959-Director of Safety with large steamship company. Safety training: Marine Safety-New York University and Occupational Safety Course by Department of Labor. OSHA training: None. Professional membership: American Society of Safety Engineers. Degree: B.S. in Biology. Safety experience: April 1971 to present-Senior Industrial Hygienist, Regional Office; 1968 to 1971-Senior Industrial Hygienist, Trans World Airlines; 1962 to 1968-Industrial Hygienist, Pan American World Airways; and 1956 to 1962-Specialist in air and water pollution, Laboratory specialist, Florida State Board of Health. Safety training: Florida State Board of Health Environmental Health training course. NASA-Microbiological Analysis Short Course; First Aid, Fire Fighting, and Respiratory Protective Device Orientation; and Toxic Materials Hazard Training (Instructor for 1 year). AIHA-Ventilation Refresher Course. TWA-Supervisors Safety Training; Defensive Driving. General Radio-Noise Measuring Equipment and Its Use. B & K-Noise Instrumentation. OSHA training: Initial CSHO Course; Industrial Hygienist Course; and Target Health Hazards Course. NIOSH training: Industrial Hygiene Short Course; and Short Course for Compliance Officers. Professional memberships: American Industrial Hygiene Association. Safety experience: June 1971 to present-ARA for Compliance; 1965 to 1971-Missouri Director of the Division of Industrial Inspection; and 1954 to 1964 Inspected industrial plants for insurance companies. Safety training: AFL-CIO-State Labor Council Safety Training and CentralMissouri State Training Program. Degree: Bachelor of Business Administration. Safety experience: 1970 to present-Safety Officer, States Program, Regional Office; 1964 to 1966-Senior Investigator, New York Department of Labor1; 1962 to 1964-Investigator, New York Department of Labor1; 1961 to 1962-Property Auditor, General Dynamics1; and 1957 to 1961-Business Manager with various construction companies with safety responsibilities. Degree: Illinois Institute of Technology (1 year); Maryland University (3 years); Certified Safety Professional. Safety experience: July 1971 to present-ARA for Technical Support; 1963 to 1971-Safety and Fire Protection Officer with GSA; 1962 to 1963-Safety Officer with North American Defense Command; 1959 to 1962-Air Force Missile Safety Staff Officer; and 1943 to 1958-Air Force Ground Safety Officer. Safety training: Safety Engineering and Safety Education-Stanford; Traffic Professional memberships: American Society of Safety Engineers. Degree: B.S. in Chemical Engineering and M.S. in Bioenvironmental Oceanography. Safety experience: June 1972 to present-Safety Engineer, Regional Office; 1970 to 1972-Chemical Lab Assistant, Graduate Student; 1969 to 1970-Systems Safety Supervisor, Kennedy Space Center; 1968 to 1969 Group Chief, Kennedy Space Center; 1967 to 1968-Engineer, Kennedy Space Center; and 1965 to 1967-Project Engineer for NASA Contract. Safety training: Bendix Launch Support, Kennedy Space Center-Solvents and Miscellaneous Liquids Safety; Electrical Bonding and Grounding Familiarization; Safety Locker Training; Petroleum Base Propellant Safety; High Pressure Gas Safety; and Explosive Devices Safety. OSHA training: Initial CSHO Course. KANSAS CITY AREA OFFICE Name: Grade: GS-13. Area Director. Degree: None but attended Oshkosh State College, Oshkosh, Wisconsin. Safety experience: 1962 to 1967-Director of Safety, 40th Bombardment Wing (SAC) Forbes A.F.B., Topeka, Kansas (Reserves); 1963 to 1971-Director of Industrial Safety, Kansas Department of Labor; and 1971 to present-Area Director, Kansas City Area Office, Region VII. 1 These three jobs concerned construction inspections. 80-497 0-72- 48 Safety training: Safety Officers Course at University Southern California; Jet Engine Technician, Accident Investigation, General Electric Company; and Nuclear Safety Officers and Supv. Course, McConnell A.F.B., Kansas. OSHA training: Initial CSHO Course. NIOSH training: Industrial Hygienist Short Course. Professional membership: American Society of Safety Engineers. Military Lt. Col. USAF (Retired). Name: Grade: GS-13. Compliance Office for Construction. Degree: B.S. in Civil Engineering; presently working on M.A. Registered Professional Engineer; Certified Safety Professional. Safety experience: 1957 to 1960-Engineer trainee for Soil Conservation Service; 1960 to 1963-District Engineer for the U.S. Forest Service; 1963 to 1964Highway Designer for private consultants; 1964 to 1967-Soil Engineer for the Corps of Engineers; 1967 to 1971-Chief, Safety Officer for Kansas City District; and 1971 to present-Compliance Officer for Construction, Region VII. Safety training: Occupational Safety Course (November 1967); Radiological Safety Course (March 1968); Accident Prevention Training (May 1969); Public Health & Medical, Chemical & Biological Safety Course (May 1969); Defensive Driving Techniques (March 1970); Fire Protection Engineering Course (May 1970); and Diver's Inspection Familiarization School (October 1970). OSHA training: Regional Administrator and Acting Area Director's Training Mtg.; OSH for Construction for CSHO's; Industrial Hygienist Course; and Refresher Construction Course. Professional membership: American Society of Civil Engineers and American Society of Safety Engineers. Name: Grade: GS-12. Compliance Safety and Health Officer. Degree: B.S.M.E.; Certified Safety Professional. Safety experience: 1953 to 1959-Instructor, College of Engineering in Houston (part time); 1949 to 1956-Safety Engineer, Hartford Accident & Indemnity Company, Houston, Texas; 1956 to 1964-Safety Engineer, Diamond Shamrock Company, Houston, Texas; 1964 to 1971-Supervisor, Safety and Plant Protection, Celanese Fibers Co.; and 1971 to present-Compliance Safety and Health Officer, Region VII. Safety training: Conference Leadership Training and Industrial Fire Fighting Training. OSHA training: Initial CSHO Course and Refresher CSHO Course. Professional memberships: American Society of Safety Engineers. Safety experience: Served on various National & local committees for Science Teachers and Chemical Safety; Twelve years experience in Health and Safety field as Industrial Hygienist and Safety Advisor; Seven years as teacher of General Chemistry (high school & junior college); 1960 to 1965-Industrial Hygienist at Bendix Corporation; 1965 to 1971-Personnel Administrator and Safety Advisor at Gulf Research and Development Co., Kansas City, Missouri; and 1971 to present Industrial Hygienist for Region VII. Safety training: Radiological Safety Officer Course and USA Chemical Corps. OSHA training: Initial CSHO Course; Industrial Hygienist Course; and Target Health Hazard Course. NIOSH training: Industrial Hygiene Short Course. Professional membership: American Industrial Hygiene Association; American Society of Safety Engineers; American Chemical Society (National Safety Committee); American Conference of Governmental Industrial Hygienists; and Administrative Management Society. Name: Grade: GS-11. Compliance Safety and Health Officer. Degree: B. S. B. A. in Industrial Management and M.S. in Safety-Certified Safety Professional. Safety experience: 1959 to 1963-Safety Engineer for Royal Globe Insurance: 1963 to 1966-Senior Safety Engineer for C & A Insurance; 1966 to 1970 Safety Engineer for Glen Falls Insurance; 1970 to 1972-Loss Control Representative for Maryland Casualty Co.; and 1972 to present--Compliance Safety and Health Officer with Region VII. Safety training: Various courses in fire prevention, Industrial Hygiene and Safety. OSHA training: Initial CSHO Course. NIOSH training: None. Professional memberships: American Society of Safety Engineers and National Board of Boiler & Pressure Vessel Inspectors. Name: Grade: GS-11. Compliance Safety and Health Officer. Degree: None, but attended Trenton State in New Jersey and Fordham University in New York. Safety experience: 1963 to 1967-Coordinator of Safety Activities for Bendix Corporation (Division of Supplies); 1967 to 1971-Safety Specialist with NASA; and 1971 to present-Compliance Safety and Health Officer with Region VII. Safety training: Spacecraft and Industrial Toxic Materials; Hazard & Protection Devices; and Industrial Safety and First Aid. Degree: None but attended Northwestern State College and Texarkana College. Safety experience: 1967 to 1967-Quality Control Safety Inspector, Lone Star Army Ammunition Plant, Texarkana, Texas; 1967 to 1970-Ammunition Loading Safety Inspector, Louisiana Army Ammunition Plant, Shreveport, Louisiana; 1970 to 1972-Ammunition Safety Inspector, Ravenna Army Ammunition Plant, Ravenna, Ohio; and 1972 to present-Safety Officer for Region VII. Safety training: Human Relations and Safety, Louisiana Army Ammunition Plant. OSHA training: Initial CSHO Course. Name: Grade: GS-12. Compliance Safety and Health Officer. Degree: A.B.S. and B.S. in Civil Engineering. Safety experience: 1964 to 1967-General Engineer at GSA Region 6; 1967 to 1972-Civil Engineer at GSA Region 6; 1972 to 1972-Supervisory Civil Engineer at GSA Region 6; and 1972 to present-Compliance Safety and Health Officer with Region VII. Safety Experience: 5 years Industrial and Explosive Safety, Remington Arms and 3 years Engineer and Crash Instructional Fire Protection, Remington Arms. Safety training: Explosive Safety Course. OSHA training: Initial Course for CSHO's. Safety experience: 1972 to present-Safety Officer, Kansas City Area Office and 1967 to 1972--Engineer Technician, U.S. Army Engineering. Safety training: None. OSHA training: Initial Course for C8HO's. Degree: Graduated New York U. Center for Safety Education 1952. Safety experience: 1971 to present-Area Director, St. Lousis Area Office; 1959 to 1971-U.S. Department of Labor Safety Consultant; 1961 opened St. Louis Office as District Supervisor enforcing Maritime Safety Standards; 1967 |